Sale!

Satic Pure Power Plug-in Filter—6-pack

Original price was: $1,254.00.Current price is: $1,048.00.

People love SaticShield’s Pure Power plug-in dirty electricity filters. They use the same technology as Satic’s whole-house units. You can see specifications and comparisons with other brands in the tabbed Description below.

 

Use to clean up dirty electricity

 

  • in smaller homes and apartments (1000 sq ft, including basements and outbuildings)
  • from devices and appliances like computers, refrigerators, and TVs
  • for travel
  • for supplemental filtering where dirty electricity levels are extremely high (as with solar) and you need additional filtering to bring levels down below 50 millivolts (mV).

 

Two to four plug-ins are typically needed to filter a smaller home. Please contact me to determine exactly what you need.

 

Can be used in homes over 1000 sq ft (including basement), but you will get better filtering with the whole-house filter. That said, I have had people successfully and happily use these to remediate larger homes. Other times, only the whole-house filter does the trick for very electrosensitive people.

 

Unlike the whole-house filter, it cannot provide phase-to-phase filtering at the circuit panel because it is not installed at the panel.

 

Also available as a 240-volt filter and can be wired for any country.

Filters out a wider range of dirty electricity than any other filter on the market: from 4 kHz to 100,000 kHz (100 MHz).

 

Doesn’t put a big magnetic field on your wiring.

 

This filter can be wired for international (240-volt) systems as well as for 3-phase systems in the U.S. or elsewhere.

 

Guaranteed!

  • 3-year warranty.
  • 30-day returns.
  • One month’s worth of free trouble-shooting dirty electricity issues.
  • Brought to you by Linda Kurtz, authorized Satic distributor and EMF consultant.

 

Questions? 

Please feel free to call me, Linda Kurtz, at 520-398-2985 or 734-972-2677. You can also email me at SmartMeterEducationNetwork@gmail.com or LindaKurtz@NoDirtyElectricity.com.

 

Product Description

Satic Pure Power Plug-in Filters

What makes Satic Pure Power Plug-in Filters Different from Other Plug-in Filters?

Why buy Satic plug-in filters when other brands are cheaper? Well, Satic’s Pure Power plug-in filters filter out a much wider range of frequencies; they filter the hot and the neutral wire; they don’t create leading current; and they do not put a large magnetic field on the wiring.

And you don’t have to buy 10 or 20 of them to filter your home! Two to four plug-ins are typically needed to filter a smaller home. Please contact me to determine exactly what you need.

To clean up dirty electricity on both phases of electricity, you must have two of these filters (sometimes you need four). U.S. and other countries with 120-volt electricity have two phases; countries with 240-volt have between one and three.

To clean up dirty electricity from a device or appliance, you need only one plug-in filter. If multiple devices are on a single circuit, you need only one filter for that circuit, not one filter per device. Please contact me with questions.

See the chart following this discussion for a comparison of the Pure Power versus other plug-in filters.

My first experience with filtering dirty electricity was with the commonly sold plug-in filter known as the Stetzer or Stetzerizer. Those filters made me sick as a dog! At the time, I had just started the Smart Meter Education Network, an activist group fighting against smart meters and for an analog meter opt-out. Analog meters don’t create dirty electricity; smart and digital meters do.

After my experience with the Stetzer filter, I doubled down on my efforts to get analog meter choice in Michigan. After all, it was clear (so I thought) that filtering would not work for me.

Fortunately, the Satic filters do not have the problems that Stetzer, Greenwave, and other cheap filters do. See the chart below to compare the specs of the SaticShield plug-in filter with the Stetzerizer and Greenwave filters.

 

Comparison of Satic, Stetzer, and Greenwave Plug-ins

Satic Pure Power Stetzer Plug-ins Greenwave Plug-ins
Filtering range 4 KHz – 100,000 kHz

(4 kHz – 100 MHz) MHz)

4 KHz – 150 KHz

(4 kHz – 0.15 MHz)

1 KHz – 30,000 kHz

(1 kHz – 30 MHz)

Filters out Dirty Electricity on Hot Wire Yes Yes Yes
Filters out Dirty Electricity on Neutral Wire on Circuits Yes No—shunts DE to neutral No—shunts DE to neutral
Number of Filters and/or Rectifiers and/or MOVs Over 5 filters

(proprietary info as to total number)

 

One filter 3 filters
Number of Filters Needed for 1000 sq ft Home 2–4 At least 10 At least 10
Warranty

 

 

 

 

 

 

 

3 years

(same technology as the whole-house filter, but rather than 10-yr warranty, warranty is 3 yrs just because people can be hard on stuff they can pull out and toss around. They will last just as long as whole-house)

 

1 year apparently 60 days
Outlet on Filter Yes No Yes
Magnetic Field on Wiring and Emanating into Rooms None to extremely minimal Yes—to the point that it is debilitating for many Yes—to the point that it is debilitating for many
Magnetic field Slight when inches away from filter; see video on whole-house filter Moderate at every place filter plugged in Moderate at every place filter plugged in
Self-Healing Rectifiers Yes No No
Capacitors that short-circuit electrical field and can create magnetic field No Yes Yes
Grounded Yes No Yes
Work with Solar Yes. Advisable to purchase Solar Power Perfect filter if you plan to use solar. Not well Not well
Works Well with Power Line Communication (PLC) Metering Yes No No
Creates Leading Current No Yes, which can and does cause some expensive equipment to fail No data, but given that technology is essentially same as Stetzer, very likely
Causes problems with charging devices No Sometimes Sometimes
Stops chargers from overheating Yes ? ?
Causes chargers to overheat No Sometimes Sometimes
Can cause equipment to operate with less heat (which is a good thing) Yes No No
Certifications UL (Underwriters Laboratory), RoHS UL UL, RoHS

 

Here is what the Greenwave website says about the Greenwave plug-ins: “Greenwave filters deploy capacitance technology to “short out” dirty electricity traveling along the wiring in buildings. Some battery-charging devices are not designed to work with high capacitance technologies. Therefore, battery chargers, back-up power supplies, and electric devices that include built-in chargers (such as electric toothbrushes and razors) should not be plugged into the same wall outlets or power strips as Greenwave® filters. Similarly, these items should not be plugged directly into Greenwave® filters that include an outlet at their base. In addition, Greenwave® filters are not always compatible with solar energy systems and the storage back-up units they use.”

____________________________________________________________________________________________________

Dirty electricity (DE) is also called line noise, power quality issues, voltage transients and harmonics, microsurge pollution, and electromagnetic interference (EMI).

Dirty electricity filters are also known as line conditioners.

This filter is made by Satic, also known as SaticShield. Sometimes people mistakenly add a “t” to the company name and call it the “Static dirty electricity filter” or the “StaticShield.”

__________________________________

Countries Using 120-volt Power

Always check with your electric company if you are unsure what kind of power you have. This list is not guaranteed to be 100% accurate, as there can be variations house to house and utility to utility.

North America

  • United States
  • Canada
  • Mexico

Africa

  • Algeria (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Cameroon (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Liberia
  • Libya (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Morocco (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Senegal
  • Togo (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Tunisia (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)

 

Asia and Middle East

  • Bahrain (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Indonesia (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Japan
  • Korea, Republic of (South Korea) (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Lebanon (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Philippines (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Saudi Arabia (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Taiwan (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Vietnam (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)

 

Australia and Oceania

  • All are 240-volt.

Central America and Caribbean

  • Bahamas
  • Barbados
  • Belize
  • Bermuda
  • Costa Rica
  • Cuba
  • Curacao
  • Dominican Republic (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • El Salvador (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Guatemala (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Haiti (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Honduras (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Netherlands Antilles
  • Netherland Antilles, Dutch side of Sint Maarten
  • Nicaragua
  • Panama
  • Puerto Rico
  • Trinidad & Tobago
  • Virgin Islands

Europe

  • All are 240-volt.

South America

  • Bolivia
  • Brazil (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Colombia (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Ecuador (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Guyana (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)
  • Suriname
  • Venezuela (check with your electric company–your power may be 115/120-volt, or it might be 220/230/240-volt)

 

 

Reviews

There are no reviews yet.

Be the first to review “Satic Pure Power Plug-in Filter—6-pack”

Specifications: SaticShield Pure Power Plug-in Filter Specifications

Warranty: 3 years.

How to install: How to Install Pure Power Plug-in Filters